|
Post by blacketp on Nov 24, 2010 1:18:29 GMT -5
every year it seems if there is a hint of green straw our TR99 always blocks, not sure if it starts at the spinners and works its way up or the straw doesnt feed into chopper correctly. A on the ball operator has no drmas as you can hear the machine and stop before blockage happens. Once straw is completly dry it diminishes. Maybe i should take less straw or pulverize it more with higher rotor speed.. so it already shredded to a degree before chopping. Or should i take chopper and rollers off completly and just use spinners.
|
|
|
Post by scott on Nov 24, 2010 15:13:53 GMT -5
what your saying is rotors aren't gring straw up correct, bars and concaves good shape, need more info, scott
|
|
|
Post by blacketp on Nov 24, 2010 15:45:36 GMT -5
threshing is perfect straw intact with 100% removal of grain and backbone of head still attached. posted on NAT and it seems im not the only one who has problems.Every thing is in good shape, i taken deflector off rear of spreader should solve the issue.there are huge amounts of wheat straw going through
|
|
|
Post by Garry on Oct 21, 2017 19:48:13 GMT -5
Just plugged the back end of tr99 when belt on spreader came off. Now the combine is bouncing up and down, even though everything seems to be working. What could be causing that?
|
|