|
Post by aussiebear on Oct 20, 2010 14:00:10 GMT -5
Is it possible to get full list of mods for 8010 somewhere have 05 and am sure after reading these forums mine has not had many that it should have
|
|
|
Post by scott on Oct 21, 2010 11:28:39 GMT -5
05 model, depending when built, cone may not have full vane setup, remove covers off both sides of rotor, are vanes on cage on left or right, left is a upgrade, feeder reveser has been upgraded, heavier front drum assy for feeder chains, case now sells a long slat for feeder chains tying them together, every other one, control pressure has been a issue, chopper shaft assy has been upgraded, one other thing comes to mind, gotta pull feeder, older machines had aluminum deflectors in front of cone, they are steel now, will wear rapidly, i worked for case, been around these ladies, shoe upgrade, scott.
|
|
|
Post by scott on Oct 21, 2010 11:33:11 GMT -5
was running out of room, dealer can't tell you whats been done? email striker782@excite.com, service manager in grand island nebraska, usa, he will need serial # of machine, since your overseas i don't know if he can help you, i can ask former employer if you wish my email is snelsen@gondtc.com, scott.
|
|
|
Post by ivkuyajadfu on Sept 3, 2019 17:06:00 GMT -5
|
|
|
Post by amofatelah on Sept 3, 2019 18:46:16 GMT -5
|
|